To upgrade the aesthetic of the home, the granite material is the most popular option. Do you know that you can effectively enhance the appearance of your home decor with the setup of granite countertops? If not then the present article will acquaint you on how you can install granite countertops and let your home look appealing. The process of installing a new granite countertop may seem like a job only for a professional team. However, with the use of appropriate tools and checklist, you can easily tackle this type of DIY project. The choice of the top quality material –granite will enhance the stability of your countertop. Continue reading below to know the proper steps for granite countertops installation:
How to install a granite countertop step by step:
Follow the below steps to accomplish the installation procedure of granite countertops:
Step-1: Measure and order DIY granite countertops:
The first step is to take measurements after the cabinets are installed. Be precise while taking measurements. The granite material is presented in a wide range of styles and choices. A DIY granite countertop service offers the granite countertops. It removes the expensive fabrication. The granite system requires sheets of ¾” plywood and you need to place it on top of the cabinets.
Now keep the countertop projected on the face frames by 1″ to 1 1/2″. You have to observe which edges of the counter must have a bull-nose or some other style of the finished edge. After measuring and ordering the DIY granite countertop, just wait for a few weeks for delivery.
Step-2: Keep tools and equipment handy:
You need to keep some common tools handy to complete the installation procedure. Names of some of the common tools you can gather are plywood sheets, power drill, circular saw, jigsaw, polyester-based epoxy resin, caulk, tint, hardener, putty knife, wooden shims, screws, and steam stone, etc. To take the measurements, you need to keep things like pencil and masking tape handy. For safe installation, you may keep safety goggles along with you.
Step-3: Prepare the Cabinets:
- Cut 3/4″ plywood to precisely fit on the top portion of all the base cabinets. (Note: This plywood would support the granite and provide proper clearance for the bull-nose edging to clear the doors and drawers. Take care the particular plywood does not project the outer dimension of the cabinet.
- Drill a hole via screws to fix the plywood to the frame of the cabinets. (Note: Make sure the hardwood face frame does not get torn off.)
- Center the screws inside the frames underneath.
Step-4: Prepare to perform the installation:
After performing the above step, you will need help while working with granite slabs. Take care to handle the granite slabs with care because they are brittle. Also, take care to give the space to safely store the slabs before the installation. It is the best idea to create a template for these countertops because your walls might not be perfectly square. To prepare the real measurements of the countertop, you have to use kraft paper. If you need scribing a slab to fit, apply duct tape to the base of the saw. In this way, the granite material stays protected. Next, use a circular saw with a dry-cut sectioned diamond blade. After that, test fit pieces that are already cut. Be careful with the long, slim pieces because they can break easily.
Step-5: Cut out the plywood sinkhole:
- Set granite in place for the sink counter.
- Trace the exact line surrounding the opening for the sink over the plywood sub counter.
- Remove the granite slabs which were dry-fitted only.
- To make a pilot hole in the plywood, make use of a spade bit and later use a jigsaw to cut the sinkhole. (Note: The size of the hole must be approximately 1/8″ bigger than the line you drew.)
- Before placing the granite slabs back over the top, put some cardboard to protect the sink.
- Remove the cardboard before joining the granite seams.
Step-6: Make the surface even:
The level of countertop can be affected by the cabinets, flooring, granite slabs, and sink. After the dry fitting of the countertops gets completed, check for uneven seams. Next, place a level on top of every slab to know how they line up. If the countertops are not leveled, add wooden shims as needed. These shims can be added between the granite slabs and plywood surface. (Note: To make sure the shims stay in place, use silicone and check that the countertops are level throughout.)
Step-7: Fasten the countertops:
- Start with the slab surrounding the sink and bring up the granite with the help of two persons. (Note: When lifting each slab, take care. This is because the granite material may break while installing.)
- Apply tiny beads of silicone across the perimeter of the plywood. Leave approximately 10 inches between each bead.
- Apply caulk surrounding the rim.
- Take the granite slab down and press it softly to fix it to the plywood.
- Reiterate the silicone application for each granite slab you use.
Step-8: Stick granite countertops down:
- With the help of other persons, lift up the granite and put half-dollar blob of silicone surrounding the perimeter of cabinets. Take care to keep space approximately every 6″ to 12″.
- Next, lay a bead of caulk across the sink rim.
- After that, apply the second bead on the top part of sink rim. By doing this, you can waterproof the gap present between the sink and the countertop.
- Finally, gently lower the granite slab.
Step-9: Join the seams:
Follow the below steps to join the seams:
- Tape over the seam with the blue colored masking tape.
- Now to fill in the seams, begin with a splotch of polyester-based resin. Later, include a bit of color, so you can match the granite’s color.
- Mix it with a putty knife.
- Continue to check the color against the stone.
- Prepare a few diverse colors to combine into the seam.
- Now you have to add the small amount of hardener and combine only a feasible amount. This is because you only have approximately five minutes to apply.
- You now need to apply a base-coat of the neutral color mix inside the seam.
- Wipe in and smooth as you go.
- On the surface, apply a bit light color.
- At last, you have to apply the darkest color.
- Once you are done, take out the masking tape so that it does not stick over the tape.
- When it gets dried after approximately 30 minutes, you need to smooth it out with a seam stone.
- In this step, make sure you have to use slow speed and stiff pressure.
- Let the stone moving in tiny circles, so you would feel whenever it is smooth.
Do we leave the plywood on or off for granite countertops?
Yes, we leave it on for 2cm granite and then take it off for 3cm so it would be easy to discard the plywood. By doing this, the granite will directly sit on top of the cabinets. This will be effective and it is recommended to do during installations.
How to clean granite countertop?
Generally, the granite countertops are sealed before installation so they do not need much cleaning. However, you can clean it using powdered soap, dish soap and all-purpose cleaners that are approved for use with natural stone. You just need to wipe with this mixture. Alternatively, you can make use of an ammonia-free window cleaner.
How thick is a granite countertop?
The thickness of the industry standards granite countertops is approximately 1 and 1/4 inch (or 3 centimeters). Almost all granite stones are found in this size, and the slabs could be as big as 105 by 54 inches. Consequently, it enables the homeowner to select a slab that facilitates long runs of cabinetry.
How to install drop in sink on granite countertop?
To install drop in sink on a granite countertop, you first need to cut a hole in the countertop. Next, you have to install clips to hold the sink down. After few hours, you have to install the tail piece and drain pipe. Once all the parts are connected, you have to test it.
How much does a granite countertop cost?
The granite countertops will typically cost you approximately $40 to $60 per square foot. The overall price for installation and materials falls in the range from $2,000 to $4,500. It is usually observed that the average cost of the granite countertop is $58 per sq. ft. (According to Countertops HQ
The granite countertops are extensively popular due to the fact that granite material is extremely durable and used to enhance home décor. With the simple installation process, you can easily upgrade the appearance of your space with these countertops.